Drive Train Protection
Reversible Flails
Triple Knife Flails
Direct Drive
Meets SAE Standards
Bob X-Change™ Attachment Mounting System
| Flail Mower - 40" | Flail Mower - 30" | Flail Mower - 40", R | |
|---|---|---|---|
| E32 | -- | -- | |
| E35 (25 hp) | -- | -- | |
| E35 (33 hp) | -- | -- | |
| E38 | -- | -- | |
| E60 | -- | -- | |
| E60 | -- | -- | |
| E60 | -- | -- | |
| E88 (Long-Arm) | -- | -- |
| Flail Mower - 40" | Flail Mower - 30" | Flail Mower - 40", R | |
|---|---|---|---|
| E85 Bobcat Compact Excavator (Tier 4) | -- | -- |
| Flail Mower - 40" | Flail Mower - 30" | Flail Mower - 40", R | |
|---|---|---|---|
| Operating Weight | 736 lb | 649 lb | 881 lb |
| Length | 32.7 in | 32.7 in | 32.7 in |
| Width | 60.4 in | 50.4 in | 60.4 in |
| Height | 28.1 in | 28.1 in | 28.1 in |
| Cutting Width | 40 in | 30 in | 40 in |
| Flow Range | 14-22.4 GPM (53-85 lpm) | 12.2-19.5 GPM (46-74 lpm) | 18.4-31.7 GPM (70-120 lpm) |
| Operating Weight with X-Change Mount | 736 lb | 649 lb | 881 lb |
| Number of Knives | 36 | 27 | 36 |
| Maximum Cutting Capacity | 4 in | 4 in | 4 in |
| Operating Weight with Pin-on Mount | 708 lb | -- | 876 lb |
Using powerful triple knife flails, you can mulch small branches, saplings, thick grass and other vegetation up to 4 in. in diameter.
Side safety chains help contain debris within the housing that could be thrown during operation. The rotor brake stops the attachment in 7 seconds or less after hydraulics are deactivated.
A rubber torsion disc absorbs impact loads that are encountered during operation. To protect the drive train, the flail mower features heavy-duty flanges on both sides of the rotor to protect the drive train from dust and debris. This also prevents wire from damaging the drive train mechanism.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
For over 80 years, Bobcat of New York has served the compact construction equipment needs of the New York Metropolitan area.
NEW YORK
MON – FRI: 6:30AM – 4:00PM
LONG ISLAND
MON – THUR: 7:00AM – 5:00PM
FRI: 7:00AM – 3:30PM
